Massey Ferguson P510 Special Control Valve

• Special directional control valve for Massey Ferguson Tractors
• This Valve is assembled directly on lift cover
• Working ports: G 3/8 "
• Double acting
• Handle 1 : Ports are plugged, spool control is detent control.This handle is used to change between external and internal hydraulics.
• Handle 2 : Working ports are  G 3/8". Spool control is spring control, double acting. This handle is to control external hydraulic. (implement/attachment of tractor) 

Fitting Instructions of P510     

• Remove the 2 bolts securing the cap on the hydraulic lift cover. Remove cap and detach from standpipe.  Ensure that the standpipe is not dislodged from its seat in the hydraulic pump
• Remove the 3 bolts securing the valve to base plate of the P510 selector/control valve. (top of P510 control valve). Separate valve and base section 
• Fit the standpipe into the inlet port of P510 base plate
• Fit the P510 base plate to the lift cover, ensuring that the standpipe is correctly located into its seat on the hydraulic pump.       
• Secure the base plate to the lift cover.
• Secure the P510 control valve to the base plate with the three bolts removed earlier

Advantage of P510 Valve

• Oil returns from P510directly into Hydraulic lift head     
• For double acting application only 2 pipes and fittings needed    
• For single acting aplications, single acting spool fitted and only one pipe needed